Add Chamfer

Add features Chamfer to end edge products / parts.
Chamfer Click on the toolbar features.
Click Trimetric on the Standard Views toolbar for a better view of the model.
In PropertyManager, under Items To Chamfer, Chamfer set to 3.
Select the top bosses face rectangle.

Chamfer created at the edge of sloping features selected, face, or edge.
To create a Chamfer:
Chamfer Click on the toolbar features, or click Insert, Features, Chamfer.
Under Chamfer Parameters:
Select the entities in the area edge and graphics for Faces or Vertex.
Select one of the following:
Angle distance
Distance distance

Read More......

Repair Image Solidwork with the help of Autocad

This time we will make improvements 3D image, with the help of autocad 2D sketch
We can include DWG files directly into SolidWorks documents to assist us in conducting
3D design changes. Langkah2nya very modest and simple.

Click Insert, DXF / DWG.
In the dialog box, browse to the folder where the files are DWG click Open.
In the DXF / DWG Import - Drawing Layer Mapping dialog box, accept the defaults and click Next.
In the DXF / DWG Import - Drawing Layer Mapping dialog box:
Select Import in the 2D sketch sheet to import all data to the 2D sketch
Click Finish.

Click Rebuild.

Read More......


  • READ MORE.......
  • Read More......

    Making Holes Using the Hole Wizard

    The first step we should do in the Hole Making

    Click the Top (Standard Views toolbar.)

    Click on the Sketch toolbar Centerline

    Click Hole Wizard on the Features toolbar.


    In PropertyManager, on the Types tab, under Hole 
    Type, select:
    Countersink for hole type.
    Metrics on the Standard Ansi.
    Flat Head Screw - B18.6.7M ANSI in Type.
    select the M4 in size.
    Select Head Clearance.
    Head Set Clearance to 1.


    elect the Positions tab. on the menu next to the hole type in PropertyManager
    Click Smart Dimension (Dimensions / Relations toolbar)

    Select the position of the center of the hole you want to create.
    Click OK

    Read More......

    easy way to learn 3d solidwork

  • READ MORE.......

  • for STEP BY STEP GUIDE 2SD, 3SD tutorial please visit......... ---or---

    Read More......

    Step by step make solidwork 3D for Beginners

    We'll start making this 3D with more detail and complete again with the start of creating a new part.
    Click the New button on the Standard toolbar.

    New SolidWorks Document dialog box will appear.

    Click Part.
    Click OK

    Next determine the plane
    Determine the plane or the area that we want to make pictures ..... top, bottom, right or left

    Next we create a sketch, for now we will make the box, then
    Click Rectangle on the Sketch toolbar.
    The Rectangle PropertyManager open in the left window.
    Move the pointer in the workspace.
    Click to place the starting point of the image.
    Move the mouse and see a dynamic preview to follow the pointer.
    Release the mouse and click on PropertyManager to complete the rectangle.

    Now add the desired dimensions.
    Click Smart Dimension on the Sketch toolbar.
    Select the box that we are drawing.
    Notice the preview box dimensions.

    Move the pointer to where we want to give dimension and click to add dimension.

    In the Modify box, click on the graph area.
    Click Extrude 2D sketches to create 3D blocks.
    Click Sketch on the Sketch toolbar to get out of Sketch.
    The settings for extrusion appeared in PropertyManager in the left pane.
    In PropertyManager, under Direction 1:
    Select End Condition Blind ins.

    Do not forget to save

    Read More......

    Filled Surface features

    Filled Surface features create a patch surface with a sketch, which is determined by the existing models on the edges, sketch, or a curve.
    we can use this feature to create a surface whose function is to fill gaps in the model.
    Filled Surface, we can use the tool in this case:
    Correcting the tidakdapat on imported correctly into the SolidWorks (where there are faces missing.)
    Filling the holes in the part that is used to print the core and cavity molding.
    For industrial design applications.
    To create a filled surface:
    Click on the surfaces Filled Surface toolbar, or click Insert, Surface, Fill.
    Set PropertyManager option.

    Read More......