sketching boss


To create additional features in the part (such as bosses or cuts),
we can make a sketch of the model faces or planes,
then Extrude the sketch.
we can make a sketch on a face or planes,
and then make a feature based on one
or more sketches.











Click Hidden Lines Removed View on the toolbar.
Click Extruded Boss / Base on the Features toolbar.
Move the pointer to the front faces.
Changes to the ends of the faces to be highlighted
to show that the faces available for selection.
Select faces the front.
Click Circle on the Sketch toolbar











































Read More......

Delete Face

Delete Face With tools, we can do:
1. Delete.
Removing face of the body surfaces, or delete one or more face of a solid body to create surfaces.
2. Delete and Patch.
Removing face of the body or body of solid surfaces and automatically patch and trim body.
3. Delete and Fill.
Removes face and produce a single face to close the gap.



To remove a face from the body surfaces:
1. Click Delete on the toolbar Face surfaces, or Insert, Face, Delete.
2. Delete Face PropertyManager appear.
3. In the area of ​​the chart, click a face-face that we want to remove.
4. The names appear on the bottom face Faces.
5. Under Options, click Delete.
Click OK.






















To remove and fill surfaces:
Follow steps 1 and 2 of the previous procedure.
Under Options, click Delete and Fill.


To remove the face of a solid body:
click Delete on the toolbar surfaces, or Insert, Face, Delete.
Delete Face PropertyManager appear.
In the area of ​​the chart, click a face-face that we want to remove.
The names appear on the bottom face Faces.
In Options, click Delete.

Click OK....















Read More......

Create embossed on the sloping surface

Steps we need to do is,
Set the initial conditions for the Extrude feature, using the Surface body.
Start making Extrude using body face, choose a valid entity for Surface body.
Surface does not have to align with field sketches.Sketches must be fully contained within the boundaries of non-planar surface or face.
Sketch the shape of non-planar surfaces begin or face.












Extrude features
Up to Surface. Select the face to extend the graphics area on Extrude.
Double-click the surface to change the condition of the End to get to the desired surface, the surface was chosen as the termination surface.
If necessary, select Reverse offset to make the opposite direction.






































Read More......

create fillets

The next step we will create a fillet
specify a radius of 1mm for each each edge, base angles,
edge of the hole and boss
Click on the Features toolbar Fillet
Select the edge.
Under the item to Fillet:
Set Radius 1mm.
Select the Full Preview.
highlighted face is filleted and previews face shown.
Select the edge that will be made ​​radius.
When we move the pointer to the hidden parts, parts will be visible so that we can select it.
When we choose each side, the name will be added to Edge, Faces, Features and Loops and previews will be updated.
Click.
















Read More......

make a sketch of the hole on extrusion cylinder

We will try to make a sketch of the hole on existing extrusion cylinder.
Stepsthat we must do ,
Click Extruded Cut feature on the toolbar.
Select the top face FOR extrusion cylinder.
Click Circle on the Sketch toolbar.
Move the pointer to the surface of the cylinder and point at the center of the cylinder.



















Move the pointer from the center to a new point.
and click to complete the circle.
Click OK.




















Add dimension to control the diameter of the circle.
Click Smart Dimension on the toolbar.
Select the circle.
Move the pointer and click to place the dimension.






Make a hole in the cylinder with through cuts.
Click on the Sketch toolbar.
In PropertyManager, under Direction 1, select Through All for End Condition.


















Read More......

Extrude cut

Extrude cut is a feature that removes material from a part or assembly.
With the parts of multibody, we can use the deduction to make disjoint parts.
we can control the other parts to keep and which parts are affected by the cut-Extrude.
we can make Extruded Cut by performing the steps:








Make sketches.
Click Extruded Cut feature on the toolbar, or click Insert,
click Cut,
click Extrude
Click OK

































Read More......

Make a sketch of the circle to be made as an extrusion cylinder

Click on the Top plane on the Standard Views toolbar.
Centerline Click on the Sketch toolbar.
centerline act as construction lines circle, to make the center circle.
Move the pointer and click to start the centerline.
Move the mouse to draw a line centerline.






















Add to dimension the sketch.
Click Smart Dimension on the toolbar.
Select the circle.
Move the pointer and click on the circle to place the dimension.
In the Modify box, enter the number for the dimension of the circle, click, and click on the graph area.
Select the middle vertically.
Move the pointer and click to place the dimension.
In the Modify box, type the number for the position of the circle, click, and click on the graph area.





















Click Extruded Boss / Base on the Features toolbar.
Select the faces on the basis of the cylinder.




Read More......