Cut revolves

Cut revolves remove material by using one or more profiles revolving around the centerline.
Selected Contours With pointers, we can select one or more non-intersecting or intersecting sketches to make a cut revolve.
2D sketch profile sketch must; 3D sketch is not supported for the profile. Axis of revolution could be a 3D sketch
Profiles can not cross the centerline. If the sketch contains more than one centerline, select the centerline that we want to use as the axis of revolution.

To make a cut revolve:
Create a sketch that contains one or more profiles and centerline, outline, or edge that will be used as a pivot.
Click revolved Cut on the Features toolbar, or Insert, Cut, Revolve
In PropertyManager, set the options as we want.
Click OK

Share on :

No comments:

Post a Comment