Extrude Base with offset

Once we make a sketch drawing,
Click Extruded Boss / Base (Features toolbar). or from the Insert menu, the boss / base, click the Extrude
In PropertyManager Extrude appear in the left pane, the view changes to Trimetric sketches, and previews extrusion appears in the graph area.
In PropertyManager,
Select the offset
Type 5:00
Select offset from surface
Determine the face that we will make it Extrude boss
Add thickness Extrude o.5mm
Click on a reverse offset to the opposite direction
Choose / click on sketch to be made ​​Extrude
Click the preview to see results
OK
Click.
New features, Extrude1, appeared in the tree FeatureManager design and graphic areas.











Read More......

A cut Loft

A cut Loft is a feature that removes material from a part or assembly.
by creating a feature to make the transition between profiles.
We can make the cut loft using two or more profiles

To cut a solid Loft, profiles of the first and lastshould the model faces
To make the cut lofts:
The first step, we must determine the sketch or curve as a guide in making the cut Loft
Click on the Insert menu, Cut, Loft.
Will appear on the left Property Manager with the option profiles and guide curves
Enter the sketch we have to make to the profiles and guide curves
Click OK
Do not forget to click show preview to see if it is according to our wishes.






















Read More......

Projecting curves sketch

We can project a sketch curve to the face to create a 3D model curve.
If we hold the first election and face one or more sketches, Sketch to
Face (s) option is enabled by the selected item is displayed in correct box.

To make projections of the curve:
Click on the toolbar Curves Curve Project, or Insert, Curve, Projection.
Projection Curve PropertyManager appear.
In Selection, Projection Type set to one of the following:
Sketch to Face
In Sketch for the Project, select an image or curve in the region from the flyout tree FeatureManager design.
Based on the projection face, select cylinders on the model's face where you want to project the sketch.
Select Projection Reverse check box, or click the handle in graphic area, if necessary.























Read More......

Fill Surface

We can use the Fill Surface at the time,
Correcting incomplete when the design is imported into SolidWorks.
Filling in the missing face face.
Filling the holes in the parts used to print the core and cavity.
Building surfaces for industrial design applications.

To create a Fill Surface:
Click the Fill Surface in Surface toolbar, or click Insert, Surface, Content.
Set PropertyManager option.
Click OK.

Select the option Optimize the surface with a surface of two or four sides.
Optimize surface option to apply a simplified surface patch
similar to the lofted surface. Potential gains are optimized
patch surfaces, including fast build times, and increased stability when
used together with other features in the model.

Show preview
Display a preview of shady surface charge.
































Read More......

Lofted surface

To create a simple lofted surface is:
we created a plane for every section profile of the apartment.
Sketch the profile section on the plane. we can make all the parts and manual sketch curves in a single 3D sketch.
Profiles with Guide Curves
Click lofted surfaces on the surface of the toolbar, or click Insert,
Surface, Loft.
Set PropertyManager option.
Simple loft
Loft using guide curves
Click OK


















Read More......

Trim surfaces

We can use the surface, plane, or sketch as a trim tool to trim the intersecting surfaces.
We have to make two or more surfaces that intersect at one point or more, or create a surface that intersect with the plane or has a sketch on his face.
Click Trim surfaces on surfaces toolbar, or click Insert, Surface, Trim.







In PropertyManager, select the type:
Standards.
Thanks surface using surface, sketch entities, curves,
plane, and so forth.
Mutual.
Thanks a multiple surfaces using their own surface.

In the selection, choose from these options:
Trim tool
Select the surface, sketch entities, curve, or plane in the graphics area
as a tool that trims the other surface.
Select a trim action:
Keep selections. Retains the surfaces listed under Pieces to Keep.
Intersecting surfaces not listed under Pieces to Keep acres Discarded.
Remove selections. Discard the surfaces listed under Pieces to Remove
Click OK.







































Read More......

Section Display Image

We can make a Section View in a picture by cutting the products we want.
section view of the cut can be straight or slanted cut in accordance with sectionnya line.
We can add dimension to the line section without editing the sketch lines.

To create a section view:
Click Section View on the Drawing toolbar, or click Insert, Drawing View, Section.
The first step we need to do before making a section view,
Our first open the file which we will create.
From the file menu -> make drawings form part
Specify the sheet size we want to use.
Display sheet format will appear if the check box.
Select and drag view drawing what we want into the sheet.
Create a help line to make a section view.







































































Read More......

Cut loft

Cut loft to create a feature to make the transition between profiles.
we make the cut loft by using two or more profiles and sketching guide.
To cut Loft, profiles of the first and last should be the model's face
or a face created by the split line, planar profile, or
surface.








To make the cut lofts:

Create a sketch that serves as a profile and guide to make the feature cut loft.
Click on the toolbar feature lofted cut.
or insert -> cut -> Loft
click sketches that function sebagia profiles and guide curves
In the area of ​​the graph, click near the same place on each profile
(Eg, the top-right), so the path of travel in the loft cut
straight line and not get twisted. Select the sketch in
sequence that we want to connect them.
A preview shows us how the profiles will be connected. This system
connecting points or closest point to where we click.
Click Isometric on the Standard Views toolbar.
Click on the toolbar feature cut loft.
Click OK





















Read More......

cut sweeps

Sweep produce base, boss, cut, or surface by using the profile along the path
The profile in the sweep will be closed.
To be open or closed path.
The path can be from one set of sketch curves contained in a single sketch,
curve, or a set of edge models.
The starting point the path must lie in the field profile.
Guide curve must coincide with the profile or the point in the sketch profile.
To cut sweeps, we can make a solid sweep by moving the tool body along a path.

To make the cut sweeps:
Sketch of a closed profile, non-intersecting in plane or face.
Create a path for the profile to follow. Use a
sketches, edges, or curves.

Click swept Cut on the Features toolbar or Insert, Cut, Sweep
In the PropertyManager:
Select a sketch in the graphics area for Profile.
Select a sketch in the graphics area for Path.
Set the other options PropertyManager.
Click OK.




































Read More......

features to mirror

Making mirrors by simple features to the face or plane.
We can select the feature or we can choose the face
which consists of the feature.

Step - step we have to do,
Mirror Click on the Features toolbar or Insert -> pattern / mirrors -> Mirror.
In the Mirror Face / Plane, select the plane ---> right plane
we can choose the features, face-face composed of features, or body with the multibody.
To use the feature: Based on Features to Mirror, click one
one or more features in the model or use the flyout on tree design
FeatureManager.
To mirror the entire model: Under the Agency for the Mirror, select a model
graphic area.













Read More......

Section Views in Drawing

We can see the inner part of an image by cutting view with the section line.
To create a section view:
Click on the section view in the Drawing toolbar, or click Insert, Drawing
View, Section.
Section View PropertyManager appeared, and the Line tool is active.
To create the look of a multi-line, or using the line the middle as the line sections, sketch the line before clicking the tool
Section View. Some of the lines can have the same label.
A warning message will appear if the standard image that we use does not allow it.
If the line does not fully penetrate the bounding box of model in view, we are asked whether we want this to be partial cut. If you click Yes, See Section made as part of partial view.






























Read More......