Cut Revolve Features

Cut Revolves add or remove material by revolving one or more profiles around a centerline.
The cut revolve feature can be a solid, a thin feature, or a surface.
The sketch for a thin or surface revolved feature can contain multiple open or closed intersecting profiles.
The profile sketch must be a 2D sketch; 3D sketches are not supported for profiles. The Axis of Revolution can be a 3D sketch.

To create a cut revolve feature:
Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature cut revolves.
Click Revolved Cut on the Features toolbar > or Insert > Cut >Revolve
In the PropertyManager, set the options.
Click OK .

Share on :

No comments:

Post a Comment