Swept Boss Base on SOLIDWORKS

The Sweep feature uses multiple sketches. A sweep is made from a profile (cross-section) and a path, and can create a boss or a cut feature. If you want, you can also use guide curves. Sweeps can run the gamut from simple to complex.

To make the sweep:
Sketches must be a closed, non-intersecting in the plane or face profile.

If using guide curves:
Create the path if you want to add a relationship between the path and the point in the profile sketch.
Create the guide curve if you want to add a relationship between the curve and the point in the profile sketch.

Create a path for the profile to follow. Use the sketch, existing model edges, or curves.


Click the Swept Boss / Base on the Features toolbar, or Insert, Boss / Base, Sweep
Swept Cut on the Features toolbar, or Insert, Cut, Sweep
Swept Surface Surface on the toolbar or the Insert> Boss / Base> Sweep
In the PropertyManager:
Select the sketch in the graphics area to profile.
Select the sketch in the graphics area to Path.
Click OK





















Share on :

No comments:

Post a Comment